iFootage Spider Crab Vehicle Camera Mount System

Description

iFootage Spider Crab Overview

• 1Description
• 2iFootage VS-146 Spider Crab Vehicle Suction Cup (66 lb Payload)
• 3iFootage VS-118 Spider Crab Vehicle Suction Cup (44 lb Payload)
• 4iFootage MA5-6 Spider Crab Magic Arm with QR Mounting (11″)
• 5iFootage 75mm Bowl Head Adapter with Quick Release Tie-Down
• 6iFootage Security Strap and Hook Kit

Designed for versatility and capable of attaching to almost any flat or curved surface, the Spider Crab Vehicle Mount System from iFootage is compatible with action cameras, cinema cameras, and even your smartphone, allowing you to easily attach a recording device to a vehicle for dynamic travel shots. Vacuum air pump buttons on each of the four suction cups ensure a tight seal on glass, plastic, or metal. The 1/4″-20 and 3/8″-20 threads and twin screw mounts ensure maximum compatibility with additional accessories.

Note: Disclaimer: This product should always be used with a secondary form of mounting and should be checked at least every four hours.

iFootage VS-146 Spider Crab Vehicle Suction Cup (66 lb Payload)

The VS-146 Spider Crab Vehicle Suction Cup from iFootage is an industrial-grade aluminum and rubber suction mount used in creating camera vehicle rigs with the iFootage Spider Crab vehicle mount system. A large pump button on the side creates a vacuum for a solid grip. It features a reversible 1/4″-20 and 3/8″-16 mounting screw, as well as multiple mounting threads to add mounting gear, accessories, and camera heads. This model of the cup supports payloads up to 66 lb.

Note: Disclaimer: This product should always be used with a secondary form of mounting and should be checked at least every four hours.

Compatibility

iFootage Spider Crab vehicle mount system UPC: 842355110863

iFootage VS-118 Spider Crab Vehicle Suction Cup (44 lb Payload)

The VS-118 Spider Crab Vehicle Suction Cup from iFootage is an industrial-grade aluminum and rubber suction mount used in creating camera vehicle rigs with the iFootage Spider Crab vehicle mount system. A large pump button on the side creates a vacuum for a solid grip. It features a reversible 1/4″-20 and 3/8″-16 mounting screw, as well as multiple mounting threads to add mounting gear, accessories, and camera heads. This model of the cup supports payloads up to 44 lb.

Note: Disclaimer: This product should always be used with a secondary form of mounting and should be checked at least every four hours.

Compatibility

iFootage Spider Crab vehicle mount system UPC: 842355110856

iFootage MA5-6 Spider Crab Magic Arm with QR Mounting (11″)

QR mounting modules on each end make this flexible 11″ long MA5-6 Spider Crab Magic Arm from iFootage a valuable tool to speed up your workflow while keeping your attached accessories safe. The arm supports up to 13.2 lb and features a QR cold shoe mounting foot on one end and a combination 1/4″-20 and 3/8″-16 QR mounting module with ARRI-Anti-twist pins on the other. The module allows you to select between 1/4″-20, 3/8″-16, and 3/8″-16 with ARRI anti-twist pins.

The arm allows you to mount and position accessories such as lights or a monitor onto a cold shoe. The QR system features a dual-lock safety system independent of the arm’s central locking knob, and the QR system also allows you to swap out adapter ends for optional replacements for more flexibility. Anti-slip gears in the center hub hold the arm in the position you set when tightening the central locking lever, which also locks the ends in position.

QR Attachment Modules

The QR modules allow you to attach the module to your accessory or camera/cage/support, and then mount the arm on the module and secure it with the dual locking system. This makes it easier to attach the arm to your camera or accessory, as you don’t have to contend with the length of the arm or that it is already attached to the camera or accessory. It also enables you to leave just the QR attached to the module when packing your gear away, and you can source additional modules and pre-attach them to your accessory for an even faster workflow.

1/4″-20, 3/8″-16, ARRI Anti-Twist Module

This module features a flip-up twist tab that lets you engage either the 1/4″-20 thread or raise a 3/8″-16 sleeve around the 1/4″-20 screw. Continuing to twist the tab engages the ARRI-compatible anti-twist pins. Reversing the direction of the twist disengages the pins, and then the sleeve. UPC: 842355120350

iFootage 75mm Bowl Head Adapter with Quick Release Tie-Down

Quickly mount or swap your 75mm flat base head on a tripod or support with a 75mm bowl using the 75mm Bowl Head Adapter with Quick Release Tie-Down from iFootage. The half ball adapter is compatible with most 75mm bowls, including third-party bowls, and it has a 3/8″-16 threaded stud that allows you to mount it on the bottom of flat base tripod heads. A threaded shaft that the tie-down attaches to holds your head in place.

The tie-down has a clever release button that allows it to slide up the adapter’s threaded shaft. This lets you save time tightening your head on the tripod legs or other support, as you don’t have to spin the tie-down all the way up the shaft. Level your head on the tripod, slide the tie-down up, release the button, and turn the tie-down to tighten it in place. To remove, turn the tie-down on revolution and press the release button to slide it off. Remember to hold the video head so it doesn’t shift when released.

UPC: 842355120527

iFootage Security Strap and Hook Kit

Ensure additional security to your Spider Crab Vehicle Mount configuration using the iFootage Security Strap and Hook Kit. An adjustable nylon cable with carabiners on either end can be fastened to the Spider Crab system’s suction cup mounts, the articulating magic arms, or the bowl mount using the included hook rings with 1/4″-20 screws.

UPC: 842355120589

In the Box

• 2 x iFootage VS-146 Spider Crab Vehicle Suction Cup (66 lb Payload)
• Limited 3-Year Warranty
• 2 x iFootage VS-118 Spider Crab Vehicle Suction Cup (44 lb Payload)
• Limited 3-Year Warranty
• 3 x iFootage MA5-6 Spider Crab Magic Arm with QR Mounting (11″)
• QR Cold Shoe Mounting Foot
• QR Multi-Mount (1/4″-20, 3/8″-16, ARRI Anti-Twist)
• Limited 1-Year Warranty
• iFootage 75mm Bowl Head Adapter with Quick Release Tie-Down
• Limited 1-Year Warranty
• iFootage Security Strap and Hook Kit
• Adjustable Strap with Hooks
• 2 x Hook Ring with 1/4″-20 Screw
• Limited 1-Year Warranty
• Phone Holder
• Carrying Case

Table of Contents

• Description
• iFootage VS-146 Spider Crab Vehicle Suction Cup (66 lb Payload)
• iFootage VS-118 Spider Crab Vehicle Suction Cup (44 lb Payload)
• iFootage MA5-6 Spider Crab Magic Arm with QR Mounting (11″)
• iFootage 75mm Bowl Head Adapter with Quick Release Tie-Down
• iFootage Security Strap and Hook Kit

iFootage VS-146 Spider Crab Vehicle Suction Cup (66 lb Payload) Specs

Packaging Info

iFootage VS-118 Spider Crab Vehicle Suction Cup (44 lb Payload) Specs

Packaging Info

iFootage MA5-6 Spider Crab Magic Arm with QR Mounting (11″) Specs

Packaging Info

iFootage 75mm Bowl Head Adapter with Quick Release Tie-Down Specs

All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.