SmallRig 4″ Suction Cup Camera Mount Kit

Description

SmallRig 4236B Overview

This 4″ Suction Cup Camera Mount Kit from SmallRig combines a vacuum cup mount, a magic arm equipped with a NATO-style clamp, and a mount adapter for action cameras to create a complete system for interior vehicle camera rigs. When mounted to smooth, clean surfaces, this kit can support gear up to 6.6 lb on moving vehicles going less than 50 mph.

SmallRig 4122B Suction Cup Camera Mount (4″)

Mount your camera on just about any flat, dry surface with this 4″ Suction Cup Camera Mount from SmallRig. This heavy-duty suction cup features a 4″ diameter, and it supports payloads up to 110 lb horizontally and up to 77 lb vertically. It is designed to mount on a flat surface and features wear-resistant construction.

A large pump button on the side creates a vacuum for a solid grip. The top plate features multiple 1/4″-20 and 3/8″-16 mounting threads, a NATO rail, plus a 3/8″-16 ARRI-style anti-twist mount to add mounting gear, magic arms, and camera heads. A dust cover is included to protect the suction cup in storage.

Note: This product should always be used with a secondary form of mounting and should be checked at least every four hours. SmallRig Magic Arm with Dual Ball Heads (1/4″-20 Screw and NATO Clamp)

Add this durable Magic Arm with Dual Ball Heads from SmallRig to your rig to mount and adjust monitors, viewfinders, lights, mics, and other accessories. It features dual ball heads with one 1/4″-20 screw on one end and a NATO clamp on the other end, and both ends feature tightening thumbwheels.

This lightweight aluminum and stainless steel arm has a load capacity of 12 lb. Each ball mount features a silicone gasket to add grip and friction to the mount when adjusting position, and both are tightened with a center locking lever. A magnetic wrench is included to help tighten the thumbwheels.

SmallRig Action Camera Mount

Mount your GoPro HERO or other small action camera onto a tripod or rig with this Action Camera Mount from SmallRig. The mount features a 3-prong action camera mount with a thumbscrew on top and a 1/4″-20 female thread on the bottom. It is designed to adapt your 2-prong camera mount onto a tripod or rig with a 1/4″-20 screw mount.

Compatibility

• SmallRig Tabletop Tripod 3903
• SmallRig Magic Arm 3873
• SmallRig Magic Arm 3874
• SmallRig Magic Arm 3875
• SmallRig Crab-Shaped Clamp 3757B
• SmallRig Suction Cup Camera Mount 3566
• SmallRig Suction Cup Camera Mount 4193
• SmallRig Camera Cage 3083B
• SmallRig GoPro Cameras: GoPro Hero 11, Hero 10, Hero 9, and others

Items Included

• SmallRig 4122B Suction Cup Camera Mount (4″)
• Limited 2-Year Manufacturer Warranty
• SmallRig Magic Arm with Dual Ball Heads (1/4″-20 Screw and NATO Clamp)
• 2 x Silicone Ring
• Limited 2-Year Manufacturer Warranty
• SmallRig Action Camera Mount
• Thumbscrew
• Limited 2-Year Manufacturer Warranty
• 2 x Silicone O-Ring

Additional Resources

No additional resources available

SmallRig 4236B Specs

Key Specs

Mounting

General

Packaging Info

SmallRig 4236B Specs

Packaging Info

SmallRig 4236B Specs

Packaging Info

All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.