Description
Zenelli LFZ Overview
The Carbon Fiber Lens Foot Plate from Zenelli absorbs vibrations better than the lens’ original aluminum foot and eliminates shake when capturing video or taking a photograph while mounted on a tripod. The foot is compatible with most Arca-type heads or clamps, but it also has three 1/4″-20 mounting sockets on the bottom in case there is no quick release system available. At the same time, safety stops located at each end of the foot prevent the mounted lens from sliding out if a quick release is partially opened, and clamped to the bottom of the foot’s dovetails is a sliding bottom plate that prevents the lens from rolling over when the lens is placed on a flat surface or table. This particular lens foot plate is designed specifically for the Nikon NIKKOR Z 800mm f/6.3 VR S, the NIKKOR Z 600mm f/4 TC VR S, and the NIKKOR Z 400mm f/2.8 TC VR S.
Compatible Lenses
In the Box
- Zenelli Carbon Fiber Lens Foot Plate for Nikon Z
- Torx Key X10
- Torx Key X20
- 4 x Torx Screws M4 x 10
- Anti-Dust Bag
- Hard Case
Zenelli LFZ Specs
| Tripod Mounting Thread | 3 x 1/4″-20 Female |
| Arca-Type | Yes |
| Material of Construction | Steel |
| Length | 5.9″ / 150.00mm |
| Width | 1.7″ / 44.00mm |
| Height | 1.6″ / 41.00mm |
| Weight | 3.8oz / 108g |
Packaging Info
| Package Weight | 0.51 lb |
| Box Dimensions (LxWxH) | 9.2 x 2.4 x 2.3″ |
Zenelli LFZ Reviews
All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Reviews
There are no reviews yet.