Leofoto LH-40 Low Profile Ball Head with Quick Release Plate (Camo)

Description

Leofoto LH-40 Overview

Securing gear with a knob-driven clamp, the LH-40 Low Profile Ball Head from Leofoto comes with a quick release plate that goes on your camera for easy attachment and detachment while shooting. With a fixed height of 2.7″ and a large ball diameter of 1.6″, the low-profile design of this ball head allows it to safely support equipment as heavy as 44.1 lb.

The LH-40 is compatible with Arca-type plates and features a bubble level as well as distance markings at the top right next to where the plate is attached. A large knob on the right side is used for panning 360, with notches on the base enabling 90 tilt in two directions for easy portrait shooting. Independent pan lock and friction control knobs are also available and can be used to easily fine-tune your composition. With a weight of 18.3 oz, the ball head is made of anodized aluminum for durability and goes on any tripod with a 3/8″-16 screw. It features a camouflage finish for improved concealment when shooting wildlife.

• Uses a knob-driven clamp and a quick release plate to secure equipment as heavy as 44.1 lb
• Low height of 2.7″, with a weight of 18.3 oz and a ball diameter of 1.6″ that lends it increased stability
• Compatible with most Arca-type quick release plates
• Capable of 360 panning, with two notches on the base that allow the head to reach a tilt angle of 90
• Three knobs for position adjustment, offering independent pan movement and tension control when used in conjunction
• Bubble level and distance markings at the top, next to the plate, for improved use
• Made of durable anodized aluminum, fits tripods with a 3/8″-16 mount

In the Box

• Leofoto LH-40 Low Profile Ball Head with Quick Release Plate (Camo)
• Quick Release Plate
• Limited 2-Year Warranty

Leofoto LH-40 Specs

General

Pan & Tilt Range

Physical

Packaging Info

Leofoto LH-40 Reviews

Rick Solid

By Wallace Rated 5 out of 5 Date: 2021-11-24

The Leofoto Ball Head is manufactured to high standards as evidenced by its smooth and easy operable controls. The separate ball head tension control works well even with a fair amount of weight attached. The bubble level is easy to see and the rotation lock does not shift the head position when tightening. My only minor concern is the D-Ring for tightening the included camera base plate is a little small and hard to grip with aging hands, a small tool solved the problem…. Very satisfied with product and for quick shipping…

Great way to make a switch to Arca Swiss type camera mount

By John Rated 5 out of 5 Date: 2021-07-13

Have used Bogen styled brackets for many many years, but wanted the stability and available accessories provided by the arca swiss mount. This ballhead, works very smoothly, is light and affordable. I was cautious and looked for what some reviewers said wastoo little tolerance in the fine adjustment. My copy had no such issue. Beautiful piece of equipment.

Nice

By Lori Rated 5 out of 5 Date: 2021-06-11

Bought this to go with my new Manfrotto MT055XPRO3 Aluminum Tripod. If is very smooth and easy to use. Would recommend this!

Awesome

By Thomas Rated 5 out of 5 Date: 2021-04-29

Awesome product and awesome people to deal with. Thanks for yaws help

Easy to manipulate.

By Rosalind Rated 5 out of 5 Date: 2021-03-16

I am quite pleased with this ballhead. The knobs are large and are easy to loosen and tighten. There has been no drift with my Sigma 160-600 Contemporary lens. I have only used a few times over the past few weeks and expect it to hold up over time.

*Really* Right

By Michael Rated 4 out of 5 Date: 2021-03-09

This is…ummm…very similar to the RRS BH-40. An excellent low profile ball head that locks tight and provides outstanding stability. My one request would be for a clamp rather than a screw to secure the QR plate to the head, but that’s really minor.

Leofoto Ball Head

By Wallace Rated 5 out of 5 Date: 2021-11-15

Purchased this head to replace an older slightly worn Manfrotto ball head. The fit and finish are outstanding, all controls work flawlessly. Secure locking is easily accomplished without using excessive force on the controls. My only negative comment is in regard to the supplied camera mounting plate. I find the D-Ring used to tighten the plate to camera tripod socket a bit small for my aging hands, a tool to assist in tightening was needed. Again, this is a minor concern that I thought I would share for folks in a similar situation. The value for dollars spent is very good and of course the good folks at BH Photo performed their excellent service of shipping same day, item arrived properly packaged in two days time. Thank you Leofoto and …

Very pleased.

By Simon Rated 5 out of 5 Date: 2021-10-27

I ordered this item from New Zealand, but when it arrived I found that the main lock knob did not function. I reported this to , they sent a pre-paid shipping label for the return, and sent me a replacement item at their expense. The whole process was surprisingly easy and took less than two weeks. Thanks B@H! The Ball Head is great too, very solid and well made. I am very pleased with my purchase and especially with ‘s customer service.

All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.